Skip to main content

Devin's Silverado Repair Manual2008 Silverado 1500 LS

Search manual

Search manual

Home Search Manual Repair and Diagnosis Diagnostic Trouble Codes Parts and Labor Service and Repair Specifications Technical Service Bulletins DTC Repair Guide About and Credits Back to SarDev AI Labs

Home › Manual › Repair and Diagnosis › Transmission and Drivetrain › Automatic Transmission/Transaxle › Service and Repair › Overhaul › 4L60-E/4L65-E/4L70-E Automatic Transmission › Removal › Turbine Shaft O-Ring Removal

Back to category Back to top Search Manual

Configuration notice: This reference library was sourced from a manual labeled for a 4WD 5.3L Silverado. The owner's VIN identifies a 4.8L 2WD truck. Verify the engine, drivetrain, emissions label, RPO codes, tank size, bed and wheelbase, procedures, torque specifications, and part compatibility before performing repairs.

Turbine Shaft O-Ring Removal

Turbine Shaft O-Ring Removal

Technical service diagram

Remove the O-ring (618) from the turbine shaft. O-Ring location is model dependent.

Devin's Silverado Repair Manual
2008 Chevrolet Silverado 1500 LS · VIN 1GCEC19C58Z150516

Technical source: Operation CHARM supplied archive.
Verify all vehicle-specific fitment before repair.